https://newsletter.en.creamermedia.com
boilers|Components|Concrete|Consulting|Consulting Engineers|Environment|Health|Industrial|Petrochemicals|Power|PROJECT|Projects|Refinery|Reinforcing|Scaffolding|skyriders|Steel|Technology|Testing|Welding|Drilling
boilers|Components|Concrete|Consulting|Consulting Engineers|Environment|Health|Industrial|Petrochemicals|Power|PROJECT|Projects|Refinery|Reinforcing|Scaffolding|skyriders|Steel|Technology|Testing|Welding|Drilling
boilers|components|concrete|consulting-company|consulting-engineers|environment|health|industrial|petrochemicals|power|project|projects|refinery|reinforcing|scaffolding|skyriders|steel|technology|testing|welding|drilling

Drones provide cost savings for plants

YING AND YANG Skyriders demonstrated the synergy between drone technology and traditional rope access during an inspection project

CUTTING COSTS The deployment of the Elios SkyEye drone can slash the cost of using a traditional access method, such as scaffolding, by as much as 80%

1st November 2019

By: Mc'Kyla Nortje

Journalist

     

Font size: - +

Drone technology presents a major cost-saving opportunity for companies, compared with traditional methods of inspection, highlights industrial rope-access company Skyriders marketing manager Mike Zinn.

Skyriders’ Elios SkyEye drone is designed specifically for indoor application, enabling the drone to access confined spaces of about 450 mm in diameter, and the drone operator to stand at a safe distance while conducting the inspection.

“The deployment of the Elios SkyEye drone can slash the cost of using a traditional access method, such as scaffolding, by as much as 80%,” he says.

Zinn explains that the Elios SkyEye allows for the rapid and thorough visual inspection of the entire area. Moreover, if any repair work, such as welding or further non-destructive testing, is required, highly qualified and experienced rope-access technicians can be deployed.

“We are able to give clients complete peace of mind throughout fulfilling their specific requirements quickly and efficiently.”

Further, Skyriders undertook inspection work in a petrochemicals environment using the Elios SkyEye drone last month. The scope of work at the refinery entailed the inspection of the boilers, vacuum furnaces and the fluid catalytic cracking unit. Zinn notes that the inspection took less than five hours to complete.

“We introduced a new way of doing inspection work for this refinery and we look forward to doing similar projects with them in the near future.”

Meanwhile, Skyriders demonstrated the synergy between drone technology and traditional rope access during an inspection undertaken at one of the country’s oldest power stations in Mpumalanga.

The fast-track project was undertaken in conjunction with partner company consulting engineers Nyeleti Consulting. The two-part project involved the inspection of two 155-m-high smokestacks.

The external inspection component was carried out by a two-person team deploying high technology drones fitted with high-definition resolution cameras and thermal imaging.

The thermal imaging was carried out very early in the morning, before the sun’s heat

could have an impact on the smokestacks. This was necessary to identify any hot spots that could indicate areas where the internal brick lining of the concrete wind shield had deteriorated, comments Zinn.

In the second part of the project, a four-person rope-access team took core samples from the smokestacks. This involved drilling 100-mm-diameter holes into the concrete and extracting the samples to be submitted for laboratory testing for compression strength and carbonation, besides others.

“While a good visual inspection is essential, and can provide a wealth of information, it is equally important for an engineer to understand the ‘health’ of the concrete, as well as the rebar or reinforcing steel. Both these components provide a good overview of the true condition of the structures.”

Zinn explains that, after the core samples have been extracted, the holes were patched using an approved patching material to ensure the integrity of the structure. Following the receipt of the laboratory results, a detailed report was submitted to the client, highlighting any issues that may require attention.

Edited by Zandile Mavuso
Creamer Media Senior Deputy Editor: Features

Comments

Showroom

Weir Minerals Africa and Middle East
Weir Minerals Africa and Middle East

Weir Minerals Europe, Middle East and Africa is a global supplier of excellent minerals solutions, including pumps, valves, hydrocyclones,...

VISIT SHOWROOM 
Alco-Safe
Alco-Safe

Developed to exceed the latest EN 15964 standards for police breathalysers proving that it will remain accurate and reliable for many years to come.

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Photo of Martin Creamer
On-The-Air (08/11/2024)
8th November 2024 By: Martin Creamer

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.11 0.162s - 194pq - 2rq
Subscribe Now