https://newsletter.en.creamermedia.com
Africa|Components|Design|Efficiency|Energy|Housing|Power|SKF|Maintenance|Bearing|Bearings
Africa|Components|Design|Efficiency|Energy|Housing|Power|SKF|Maintenance|Bearing|Bearings
africa|components|design|efficiency|energy|housing|power|skf|maintenance|bearing|bearings

Lightweight induction heaters offer optimised performance

The SKF TIH 100m induction heater

The SKF TIH 100m induction heater

2nd June 2021

     

Font size: - +

Small and medium induction heaters from SKF are designed to optimise performance, efficiency and handle-ability, while also delivering time and energy savings.

The compact and lightweight design of the induction heaters combines high heating capac­ity with convenient portability. The small TIH 030m weighs 20.9 kg and the medium-sized TIH 100m weighs 42 kg and boasts the same efficiency and performance as its smaller counterpart while offering increased capacity.

SKF South Africa product manager for MaPro Eddie Martens highlights another innovative design: “Due to the smart placement of the induc­tion coil outside the housing, the small and medium units are able to heat bearings weighing up to 40 kg and 120 kg respectively. In fact, in less than 20 minutes, the TIH 030m can heat a 28 kg bearing and the TIH 100m a bearing weighing 97 kg, saving the end-user substantial time and energy.”

Both induction heaters are equipped with thermal overheating protection to reduce the risk of damage to the induction coil and to the electronics. This aims to extend the unit's lifespan and also reduces maintenance and repair costs. The power electronics are designed to ensure accu­rate control of electric current and rate of temperature increase, while also allowing for cut-outs in order to prevent overheating. The temperature mode is pre-set at 110 °C to prevent the bearing from over-heating and the two models are also equipped with a time mode for heating components other than bearings.

The two-step power setting and smaller yokes allow for the safe heating of smaller bear­ings while consuming less power. Both units are supplied standard with three yokes and are available in two executions, namely 230V/50-60Hz or 100-110V/50-60Hz (TIH 030m) and 230V/50-60Hz or 400-460V/50-60Hz (TIH 100m) and the TIH 100m is equipped with a standard swivel arm for large size yokes.

Comments

Projects

Showroom

Yale Lifting Solutions
Yale Lifting Solutions

Yale Lifting Solutions is a leading supplier of lifting and material handling equipment in Southern Africa. Yale offers a wide range of quality...

VISIT SHOWROOM 
John Thompson
John Thompson

John Thompson, the leader in energy and environmental solutions through value engineering and innovation, provides the following: design, engineer,...

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Photo of Martin Creamer
On-The-Air (15/11/2024)
15th November 2024 By: Martin Creamer

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







sq:0.179 0.286s - 279pq - 2rq
Subscribe Now