https://newsletter.en.creamermedia.com

Receive our free daily newsletter:

Welding & Cutting

An image depicting a smiling man wearing a red shirt and black vest
Merger results in beneficial services
29th April 2022 By: Sabrina Jardim

Abrasives supplier First Cut and gas safety training and equipment company Gas Safety International’s (GSI’s) aim - through their merger of interests – is to mitigate the challenges in the metal... 


An image depicting Kelvion's fully welded plate heat exchanger the K° Bloc
Local heat exchanger industry waning
22nd April 2022 By: Sabrina Jardim

The local heat exchanger industry is facing challenging times owing to factors such as the Covid-19 pandemic and the country’s economic state, says heat exchange solutions provider Kelvion... 


A red roof made of Y8 Rebar bent at various angles to create a Swoosh effect for client Nike at the Shapa Soweto Training Centre
Challenging project brings Swoosh to Soweto
18th February 2022 By: Halima Frost

Steel and tube supplier Stewarts & Lloyds Robertville has successfully completed a steel fabrication project for global brand Nike in the newly developed Shapa Soweto Training Centre, in Soweto,... 


A high top 6 meter container with a boiler inside supplied with all ancillaries rented out by Combustion Technology
Company adds more mobile boilers to portfolio
4th February 2022 By: Halima Frost

Local boiler and burner supplier Combustion Technology is adding two new boiler rental units to its rental offering, bringing its total available capacity to five mobile containerised boiler units.... 


An image of Thermaspray's laser cladding process on the knife gate of a knife gate valve
Coating solutions extend valves life span
5th November 2021 By: Nadine Ramdass

High technology spray coating specialist Thermaspray offers the distinct technologies of thermal spray, laser cladding and Teflon for application of coatings on new or refurbished valves. These... 


Range for maintenance extended to Zambia
22nd October 2021

Industrial products provider BMG has extended its integrated engineering solutions services in Zambia to include the supply and support of a comprehensive range of personal protection equipment... 


A Charnaud stand at an event with Hazmat suits, Reflective clothing, corporate clothing, gloves, goggles and boots
PPE plan crucial to employee safety
22nd October 2021

Hi-tech protective clothing manufacturer Charnaud stresses that the safety of all employees depends on the creation and strict implementation of a personal protective equipment (PPE) plan.... 


Welding register mitigates recruitment challenge
3rd September 2021 By: Khutso Maphatsoe

With fabrication companies finding it difficult to recruit welders for their operations, the Southern Africa Institute of Welding (SAIW) has launched the welding register to mitigate this... 


Woman welding on shop floor
Company strives for gender parity for women
3rd September 2021 By: Khutso Maphatsoe

Electromechanical equipment manufacturer John Thompson is committed to recruiting and promoting more women in the manufacturing industry. The company’s yearly intake of apprentices encourages the... 


Institute set to open school in Middelburg
3rd September 2021 By: Khutso Maphatsoe

The Southern Africa Institute of Welding (SAIW) is set to open a satellite campus in Middleburg, Mpumalanga. Middleburg falls under the Steve Tshwete local municipality, which is one of 27 of the... 


Institute launches flexible payment plan for courses
3rd September 2021 By: Khutso Maphatsoe

Owing to the challenges of Covid-19, the Southern Africa Institute of Welding (SAIW) has launched a flexible payment plan for its modularised courses, which it believes will benefit its members.... 


Institute launches flexible student-centric approach
18th June 2021

Looking at the practicalities of training amid the Covid-19 pandemic and the resultant financial fallout, the Southern African Institute of Welding (SAIW) management team has visited a substantial... 


CUTTING EDGE TRAINING EQUIPMENT 
Workshops teach operators about abrasive tools and how to safety handle cutting and grinding equipment
Skills key to economic upturn
18th June 2021 By: Claire O'Reilly

Welding and cutting are essential skills within manufacturing, which is a sector that may hold significant opportunities for uplifting South Africa’s economy and decreasing the unemployment rate,... 


HUMAN-MACHINE COLLABORATION
Robots will always require quality assurance, operators and support staff
Robots in the workforce
18th June 2021

Robots are not here to replace humans, but to create a human-machine collaborative model for a more efficient and productive way of operating, says industrial robot manufacturer Yaskawa Southern... 


ORBITALUM GF SAW
Orbital pipe cutting machine used in food and beverage, and pharmaceutical, industries
Orbitulum saw popular across various industries
18th June 2021 By: Claire O'Reilly

Industrial and electronic products importer and distributor Actum’s Orbitalum GF saw range, designed for cold cutting and bevelling, is becoming increasingly popular in the food and beverage, and... 


FIRM GRIP 
The BAND-IT stainless steel band clamps spread their clamping force out across the full perimeter of the items they are joining
Manufacturer mitigates supply challenges
28th May 2021 By: Theresa Bhowan-Rajah

With the global pandemic posing challenges across all industries, the greatest challenge that industrial and electronic supplier Actum faces is the timeous supply of raw materials. “Actum Group is... 


PERFECTLY NESTED
The flanges and seals made on the new CNC waterjet machine are suited in design and material for perfect nesting
CNC machine bolsters company offering
14th May 2021 By: Halima Frost

Waterjet cutting service provider MaxJet Global has invested in a new computer numerical control (CNC) waterjet machine to bolster its specialised flange and seal offerings for the valves sector.... 


Shadow Work
New Age Engineering Solutions prioritises skills development
Covid clouds metal fabrications industry
23rd April 2021 By: Nadine Ramdass

The Covid-19 pandemic has had a ripple effect on the metal fabrications industry, resulting in low investment, job losses and a decrease in opportunities and development, among other challenges,... 


RANGE OF USES
The new Multimatic 235 is ideal for manufacturing, maintenance, construction and general fabrication applications
New welder with multipurpose capabilities
6th November 2020

Arc welding and cutting equipment manufacturing company Miller Electric has introduced the new Multimatic 235 multiprocess welding power source. This machine offers ease of use and higher output... 


EXTENDED RANGE
BMG’s range of Jasic welding equipment comprises arc inverter welders, tungsten inert gas, metal inert gas metal active gas welders and plasma cutters
Latest equipment supplied to industry
6th November 2020

Engineering components provider BMG is committed to assisting industry create a healthy, clean and safe environment for welding procedures. This is achieved through the supply of the latest... 


BETTER AND BETTER
The current revamp project focused primarily on enhancing the repeatability and furthering the development of the welding parameters
Digitalised process takes pipe welding to next level
6th November 2020 By: Mc'Kyla Nortje

Japanese steel manufacturer JFE Steel Corporation has produced the first pipe at its Fukuyama Works in Japan after the successful revamp of its submerged arc welding stands by metallurgical plant... 


EASE OF CONTROL
The pulse mode makes it possible to bypass the intermediate arc, which is difficult to control and prone to spatter
Pulse welding function leads to 70% less rework, says manufacturer
6th November 2020

Austria-based photovoltaic manufacture Fronius is upgrading its TransSteel series with the addition of the pulse function, the company stated in a press release in September. “Not only does the... 


COOL TO BOOT 
The boot specially designed to fit the female foot is both functional and pretty
New safety shoe and boot brands faring well
23rd October 2020

Although the Covid-19 pandemic and its subsequent restrictions on trade and events have set back personal protective equipment (PPE) specialist Sisi Safety Wear’s Basi boot – which features a... 


Key issues in welding stainless steels
23rd October 2020

Most stainless steels have good weldability if some key issues are understood and addressed, correct procedures are followed and expert advice is obtained if the organisation is inexperienced, says... 


BREATHING EASY
The PAPR system purifies air by sucking it through a series of specific air filters, subsequently delivering clean, purified air into the helmet for the welder to breathe
Safe and certified welding supply
2nd October 2020

With fully certified technology being necessary to improve the quality, quantity and safety in the chemicals and petrochemicals environment, integrated gas and welding distributor Unique Welding... 


TICKING THE BOX
Some companies are putting only the bare minimum in place to ensure safety within their manufacturing processes
Safety up but costs hamper industry uptake
2nd October 2020 By: Tracy Hancock

Safety is improving in the local metal fabrication sector as more companies realise the importance of having stricter safety protocols in place, says local blades and electrodes manufacturer, and... 


MOBILE SAFETY BMG's Plymovent solution allows for a mobile extraction unit to be placed at the source of the fumes improving safety on site
New product range decreases welding risks
4th September 2020

Industrial equipment supplier BMG’s Tools & Equipment division has introduced a range of specialist products, systems and services to assist industry to create a healthy and safe work environment,... 


AESTHETICALLY EASING The new welding helmet offered by ESAB Welding & Cutting enhances the clarity and colour seen by the welder, allowing for better welds
New welding helmet offers better clarity
4th September 2020

Welding equipment producer ESAB Welding & Cutting Products has launched its new Savage A40 automatic welding helmet. Launched in July, the new Savage A40 automatic welding helmet provides ideal... 


STIMULATING SIMULATOR The SAIW is using a welding simulator to enable students to gain hands-on experience before entering the workforce
Digital platforms used for lectures
4th September 2020 By: Halima Frost

The Southern African Institute of Welding (SAIW) launched online learning for students at its Cape Town and Durban welding schools in April after Covid-19 lockdown restrictions prevented students... 


TRAINING SPARK Southern African Institute of Welding is helping the Centre of Excellence for Engineering in Ethiopia boost its qualified welder capacity
SAIW helps Ethiopia to train welders
4th September 2020 By: Halima Frost

The Southern African Institute of Welding (SAIW) has been approached by the Centre of Excellence for Engineering in Addis Ababa, Ethiopia, to assist in a substantial training and certification... 


PATH FINDER The new Prospectus app being introduced by The Southern African Institute of Welding will help prospective welders chose their career path
Institute developing app for students
4th September 2020 By: Halima Frost

The Southern African Institute of Welding (SAIW) will launch its new Prospectus application (app) for Android and iOS operating systems ahead of 2021’s student registrations. “Prospectus, as the... 


ON TRACK TIPPER
The use of containerised bulk materials handling solutions ensures safe and efficient offloading in road and rail hauling
Efficient wagon handling lowers operational costs
31st July 2020

The safe and efficient offloading of materials from both rail wagons and road trucks improves efficiencies, lowers operating costs and protects product integrity during bulk handling, says... 


ACCREDITED FUSION Transmashholdings Africa have been awarded an International Standards Organisation 3843 welding certification which will help draw in new clients for the company
Manufacturer obtains welding certification
31st July 2020 By: Halima Frost

Rolling stock manufacturer Transmashholdings (TMH) Africa, which acts as the centre of excellence for narrow-gauge rolling stock within the TMH Group, announced in March that it had been awarded... 


Saisi supports govt’s step towards export tax on scrap metal
8th July 2020 By: Marleny Arnoldi

The South African Iron and Steel Institute (Saisi) has welcomed government’s directive for the scrap metal supply chain to be supported. Saisi believes it is of national importance that the... 


OPEN UP THE INDUSTRY 
The noticeable lack of apprenticeship opportunities is regarded as one of the main obstacles facing artisan learners in South Africa
Welding institute championing training initiative
19th June 2020 By: Mamaili Mamaila

The Southern African Institute of Welding (SAIW) is championing work-based apprenticeship learning for the welding industry through the SAIW Foundation, and the Quality Council for Trade and... 


DIY PERSONIFIED 
Matus South Africa’s high-quality welding and plasma-cutting industrial and do-it-yourself machines all carry a two-year warranty
Welding range offers value for power tools wholesaler
19th June 2020 By: Mamaili Mamaila

Power tools and hardware wholesaler Matus South Africa’s MatWeld range continues to be a big part of the company’s business, says Matus welding category manager Warren Pedlar. 


1
2
3 4 5 6 7 8

Sector News

Showroom

Alcohol Breathalysers
Alcohol Breathalysers

Supplier & Distributor of the Widest Range of Accurate & Easy-to-Use Alcohol Breathalysers

VISIT SHOWROOM 
SABAT
SABAT

From batteries for boats and jet skis, to batteries for cars and quad bikes, SABAT Batteries has positioned itself as the lifestyle battery of...

VISIT SHOWROOM 
Condra Cranes
Condra Cranes

ISO-certified Condra manufactures overhead cranes, portal cranes, cantilever cranes and crane components: hoists, drives, end-carriages, brakes and...

VISIT SHOWROOM 
Rittal
Rittal

Rittal is a world leading provider of top-quality integrated systems for enclosures, power distribution, climate control, IT infrastructure and...

VISIT SHOWROOM 

Latest Multimedia

sponsored by

Photo of Martin Creamer
On-The-Air (15/11/2024)
15th November 2024 By: Martin Creamer
Magazine round up | 15 November 2024
Magazine round up | 15 November 2024
15th November 2024

Option 1 (equivalent of R125 a month):

Receive a weekly copy of Creamer Media's Engineering News & Mining Weekly magazine
(print copy for those in South Africa and e-magazine for those outside of South Africa)
Receive daily email newsletters
Access to full search results
Access archive of magazine back copies
Access to Projects in Progress
Access to ONE Research Report of your choice in PDF format

Option 2 (equivalent of R375 a month):

All benefits from Option 1
PLUS
Access to Creamer Media's Research Channel Africa for ALL Research Reports, in PDF format, on various industrial and mining sectors including Electricity; Water; Energy Transition; Hydrogen; Roads, Rail and Ports; Coal; Gold; Platinum; Battery Metals; etc.

Already a subscriber?

Forgotten your password?

MAGAZINE & ONLINE

SUBSCRIBE

RESEARCH CHANNEL AFRICA

SUBSCRIBE

CORPORATE PACKAGES

CLICK FOR A QUOTATION







pqt: 0.208s - ct: 0.449s - 414pq - 2rq
Subscribe Now